Website

 

Everybody is bound to have their personal idea when it comes to Hot Water Heater Repair.

Numerous modern homes take advantage of an electrical hot water heater for their heater, because of its benefit and convenience of use. However, just like any other electric home appliances, issues may arise with its use, all of a sudden. It can be truly aggravating to get up to a chilly shower as opposed to a warm one or having your bathroom with water that isn't hot enough or perhaps as well hot. Whatever the instance might be, hot water heater problems can be fairly aggravating. Luckily, we've made a checklist of feasible solutions to your hot water heater concerns. There are a number of elements that could create many of these troubles, it could be an issue with the power supply, the electric burner, or the thermostat. Before doing anything, guarantee you shut off the major power supply for security. Whatever the problem is, getting it dealt with must not position way too much of a problem if you follow these steps:

 

Call A Specialist:

If after replacing all faulty components as well as resetting your temperature level, the hot water heater still isn't functioning, you might require to call an expert plumber for a specialist opinion. The issue with your heater could be that the cold and hot faucets have actually been switched over or it might be undersized for the quantity of warm water required in your house. Whatever the case might be, a professional plumber would certainly help solve the problem.

 

Inspect Your Power Supply:

As fundamental as this may appear, it is very needed. Without sufficient power, your hot water heater will not operate. So the first thing to do when your water all of a sudden stops working is to verify that it isn't a power issue. Inspect if the fuse is blown out or the circuit breaker tripped. If the breaker is the concern, just turn it off and on once more. Replace any kind of damaged or worn-out fuse. Examine the device with power after these changes to see if it's currently working.

 

Examine Your Thermostat:

If your hot water heater still isn't functioning or the water coming out isn't hot enough, you might require to examine the temperature settings on your top thermostat. Make sure the breaker is switched off prior to doing anything. Open the gain access to panel and also press the red button for temperature level reset above the thermostat. This should help warm the water. Transform the circuit breaker back on as well as examine if the problem has been resolved.

 

Inspect the Burner in the Hot Water Heater:

If it's not a power trouble, after that try taking a look at your burner if it is still working. Test each of your heating elements to be sure the issue isn't with any of them. If any of them is defective, change that part and after that inspect whether the warm water is back on.

 

Final thought

Hot water heater issues are not always significant. A number of them result from minor issues like a blown fuse or worn-out heating element. Replacing the damaged components need to work. However, if you are still incapable to solve the trouble, give a call to your nearby plumber to come to get it fixed.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

Hopefully you liked our section on Hot Water Heater Repair. Many thanks for taking time to read through our blog post. For those who enjoyed our article please be sure to pass it around. We enjoy reading our article about No Hot Water — Water Heater Repair.

Stress-free? Call now!